Syllabus for Engineering Graphics S1&S2

BE110 Engineering Graphics


Course  No:
Course  Name
L-T-P Credits
Year of Introduction
BE110
*ENGINEERING GRAPHICS
1-1-3-3
2016

Module
Contents
Hours
Sem. Exam Marks





I
6 exercises

Introduction to Engineering Graphics: Need for engineering drawing.

Drawing instruments; BIS code of practice for general engineering drawing.

Orthographic projections of points and lines:-Projections of points in different quadrants; Projections of straight lines inclined to one of the reference planes, straight lines inclined to both the planes; True length and inclination of lines with reference planes; Traces of lines.





14





20%







II
12 exercises

Orthographic projections of solids:-Projections of simple solids* in simple positions, projections of solids with axis inclined to one of the reference planes and axis inclined to both the reference planes.





11





20%
FIRST INTERNAL EXAM







III
12 exercises

Isometric Projections:-Isometric projections and views of plane figures simple* and truncated simple* solids in simple position including sphere and hemisphere and their combinations.

Freehand sketching: Freehand sketching of real objects, conversion of pictorial views into orthographic views and vice versa.







09







20%










IV



- s
-
t .                                   s. Transformations: move, copy, rotate, scale, mirror, offset and array, trim, extend, fillet, chamfer. Dimensioning and text editing. Exercises on basic drafting principles, to create technical drawings. Creation of orthographic views of simple solids from pictorial views. Creation of isometric views of simple solids from orthographic views. Solid modelling and sectioning of solids, extraction of 2D
drawings from solid models. (For internal examination only, not for University Examination).







l hours are allotted in U slot for
CAD
practice)










Internal
SECOND INTERNAL  EXAM (to be conducted  only after finishing CAD Practice.)





V
9 exercises

Sections and developments of solids: - Sections of simple* solids in simple vertical positions with section plane inclined to one of the reference planes - True shapes of sections. Developments of surfaces of these solids.





12





20%




VI
6 exercises

Intersection of surfaces: - Intersection of prism in prism and cylinder in cylinder - axis bisecting at right angles only. Perspective projections: - perspective projections of simple* solids.





09





20%
*Triangular, square, pentagonal and hexagonal prisms, pyramids, cones and cylinders.
END SEMESTER EXAM








EmoticonEmoticon